The topic runs about RAID recovery and all the things linked with it. The utilization of embedded Raid controller may require the Raid array recovery. So, look at one instance. After you've equipped a Raid array on an embedded chip set controller from AMD SB 600. You were glad because everything worked without any difficulties, but suddenly the moment of your personal computer refreshment came. And you settled to select Intel Core processor. You've selected a motherboard, but there is a built-in controller ICH9R, replaced winchesters and Raid array can't be defined. There're 2 ways out:

1. There's a way of receiving new hard disks and creating a new Raid array on them. In this case you will have to transfer the old info to new hard drives and spend a lot of time to recover preceding Raid array.

2. Or you may apply to a “Data recovery laboratory” where your Raid array will be recovered for some certain amount of funds and during little term by means of file transfer. But the problem would not simply exist in situation when persons use external Raid array, because in this case persons need only to transfer a controller with hard drives. One more difficulty is that nowadays there are lots of built-in semi-hardware Raid controllers in the market. Such controllers may restore only 1, 0+1, 5 Raid arrays and some other means of file restoration are not available for them.

The usage of “mirroring” as guarantee of safety. Some persons claim that if you would not utilize stripe (Raid 0), you are certainly protected from Raid arrays and file recovery. But there're situations when no “mirroring” would assist you because there are lots of problems as virus assaults, driver problems in the operating system and electricity defaults. So, what people can do in this case? The only thing you have to do in this case is to strive to restore all the data from Raid array or restore your Raid array in whole. The best point you may do here is to switch off your PC and take it to a data recovery expert or to get a specialized program. Only making these strides you would get a possibility to protect and recover your data from Raid arrays. But you are to realize that this is not a simple thing to recover hard disk with hardware difficulties. Persons can use various data recovery solutions for Raid arrays that act by the principle of unerase devices.

The case when all the settings of the motherboard's BIOS fell down to zero. It also can occur that a battery of a motherboard disburdens and neither BIOS nor operating system can see Raid controller. Such things happen when BIOS settings are made by default value. Such situations draw another difficulty with unqualified specialists that can come to you, reinstall operating system and claim that they could not save any information you need. You should remember that in such situations you have to entrust Raid array recovery just to a qualified professional. Such person would get your computer, see the problem and resolve it. That would take approximately a half an hour of your and his time.

The recovery of data from Raid 0. There's a conviction that if one of the hard drives will be broken down during the utilization of Raid array all the information will be irreparably lost. It's true. You may call for a professional help or purchase a specialized type of restoration software and try to restore your data. So, you may simply buy a new hard drive and recover all your Raid array information there. So, if you're interested in RAID controllers you're to go on the internet search.

No comments yet.

RSS feed for comments on this post. TrackBack URI

Sorry, the comment form is closed at this time.